What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 02:39
One
This is the picture of an electronic coil of wire wound around a core of magnetic material.
A fuse is a non-resetable over current circuit protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are three different concepts here that are getting confused.
This is 'the assistant's answer'
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The 'Japanese Walking' Fitness Trend Has Science-Backed Benefits - ScienceAlert
An AC voltage/ current source, and an ac inductive load.
eight
The other is “what does a “fuse” do?”
Magnetic fields appear to be as old as the universe itself. What created them? - Space
He then describes the function of a fuse.
In schematic diagrams this is the symbol for a fuse:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Mountaineers Defeat Kentucky to Advance to Super Regionals - West Virginia University Athletics
What is lightning?
He then describes Rainy Season and Lightning.
There are two important concepts here.
At least they know the answer if they wanted it.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
a photo is worth a thousand words.
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But… the neutral is now “floating” because of the 1 ohm resistance.
BlackRock removed from Texas blacklist after climate policy rollback - Financial Times
This is where this question deviates from being a 'generic' question, and becomes more specific.
I post the exact comment here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
but I think this circuit , shows a few more pieces.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Make-A-Wish helps Tacoma cancer patient fulfill dream of giving back to fellow children - KOMO
[old diagram got deleted by accident]
but this device (an Inductor) … impedes the rapid changes in the current.
It seems Mohan does not understand the difference between a comment and an Answer.
The #1 Breakfast to Eat to Support Your Metabolism, According to Dietitians - EatingWell
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The third is lightning and “how it gets conducted into a home.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why do older siblings always hate younger siblings?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
A circuit breaker is similar, but is resettable.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It also is a device that limits the change in current flow.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
Upvotes:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is where the MOV conducts again, and dissipated the energy.
nine
First Sentence:
At one ohm, the resistor has a maximum of 1 watt power.
He then asserts :
These are simplified answers to the original question, and does not change anything I wrote above.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, the voltage could go up to 500 volts, and the fuse will not open up.
This device then solves the entire problem.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This one hit behind the barn.
Barnstars:
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[image of Common-mode choke]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Now when you have a certain ac resistance, then a current flows in a loop.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Because the load is inductive, the current lags the voltage.(by a bit).
so, what happens?
What does a fuse do?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
what exactly is a ‘surge’ protector?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
For this case there are devices called Metal oxide varistors (MOV).